skill

691Currently online
124Today's Reading
49Share Today
Multilingual display

Waste materials - Make picture frames

2018-02-22 01:36:00

Photo frame Photo frame: similar to a square, the inside is empty, and the blank space is just to put the commonly used photos. It is mainly used for the four sides of the photo positioning, and enhance its aesthetic. It also helps to protect the quality of the photo, like a picture frame with glass, which can prevent the photo from becoming yellow and so on. There are many kinds now

Tools/Materials

Get two pieces of cardboard, a pen, a knife, a ruler, and double-sided tape

Steps/methods
1

On one piece of cardboard, the size of the photo is roughly drawn and named Circle A. Take circle A as the standard, expand 2cm outwards, and name it as coil B. Take coil A as the standard, shrink inward 1cm, named as coil C

2

Cut off the excess parts outside coil B and hollow out the parts inside coil C with a tool. Get a paper frame as a panel.

3

Using the panel as a template, cut the other fingerboard to the same size as the base plate

4

Related content Illegal climbing taken from experience

5

Attach to the edge of the bottom plate with double-sided adhesive.

6

Make a stand. Cut out 5 cm wide strip, is divided into five sections, respectively, 1.3 cm wide, 2.5 cm, 2.5 cm, 12 cm, 1.3 cm

7

Use a large piece of adhesive paper to make it look like the following picture.

Recommendation