Ceramic tile binder is a polymer modified cement-based ceramic tile binder, which is formulated with high-quality cement, sand, redispersed emulsion powder and other additives, and has good compressive strength, durability and good flexibility, bonding strength and shear strength of organic matter. Mainly used for indoor, external wall or ground paste tile or stone. Ceramic tile glue is now widely used in decoration projects for tiling, but there will be a lot of problems in the use process. We can refer to the specific solution.
Main material: tile glue, tile
Auxiliary materials: scraper, mixing bucket, shovel, spade, sand, etc
Phenomenon: Empty drum phenomenon on the back of the tile solution: 1, use a larger size tooth scraper. 2. Increase the inclination of tooth scraper and tile.
Phenomenon: The tooth shape of the brushing glue layer is not uniform reasons and solutions: 1, the thickness of the batch scraping glue is not enough 2, there is dry glue in the tooth hole, to clean the tooth shape scraper 3, the scraping speed should not be too fast 4, the glue mixing is not uniform, to fully stir
This page is based on experience
Phenomenon: The reason for the sinking of the tile when pasting: the slurry is too thin, and water should be added in proportion. Solution: The tile is relatively heavy, to be constructed from the bottom up.
Phenomenon: There is no glue on the back of the tile or insufficient bonding area. The reason is that the weather is hot and dry, and the scraping area of each batch is too large, resulting in water loss on the surface of some glue. Solution: The scraping area of each batch of glue should be reduced, and the glue should not be lightly touched by hand without adhesion, and the paste should be wiped again after scraping.
Phenomenon: Check the time and space drum solution: 1, has exceeded the adjustment time forced adjustment, remove the tile to re-lay. 2, the glue is not enough, to apply more.
Phenomenon: insufficient bonding force reason: 1, tile glue type selection is improper. 2, the slurry mixing is not uniform. Solution: 1, choose the right type of tile glue. 2, the slurry should be stirred evenly.