Mosquito light should pay attention to what.

1, the principle of mosquito lamp mosquito is a phototaxis, through carbon dioxide and seek sex pheromones to find the target, like the flock of insects diptera mosquito family. Science has proved that human exhaled carbon dioxide is a substance that attracts mosquitoes to the human body, and the mosquito lamp was invented and produced according to this characteristic, without any chemical substances, the captured mosquitoes are generally dried or die naturally, which is a very environmentally friendly way to kill mosquitoes. 2, classification of mosquito light Mosquito light types can be divided into sticky trap mosquito light, electronic mosquito light, air suction mosquito light three kinds. ① Sticky trap mosquito killing lamp: no bad smell of burning; No sound and electric shock sparks; The insect corpse will not be decomposed and scattered by electric shock, causing environmental pollution; No high voltage grid, safe use. ② Electronic mosquito light: circuit design current limit; Simple low power consumption; High efficiency; As long as the power supply can be used. ③ Air mosquito lamp: the general volume is small; You can take it with you; Generally used in families. 3, the use of mosquito lamp ① put the mosquito lamp in the open place of one meter high, when the environment is dark, the mosquito killer has the fastest mosquito killing speed and the best effect. ② Use area indoor 50m2 ~ 60m2, outdoor 100m2. For the first time, it is best to choose the evening when the sky is just dark, close the doors and Windows or screen doors and Windows, turn off the lights, focus on mosquito control for 2 to 3 hours, and people return to the room without stopping, until the next morning, for 1 to 2 weeks. In summer or during mosquito activities, it can be used every day to eliminate mosquitoes that leak into the room through loose doors and Windows. ③, the use of business premises, can be opened in the evening before work to kill mosquitoes and fly, turn off the lights, after a night of trapping, indoor mosquitoes can be basically eliminated. (4) Before use, check whether the voltage and frequency are consistent with the product, and use the power socket that is consistent with the product. The ground wire of the socket must be well grounded, and then connect the power supply, turn on the power switch, and see the purple light in the lamp, the work of killing flies and mosquitoes has begun to work. ② Use area indoor 50m2 ~ 60m2, outdoor 100m2. For the first time, it is best to choose the evening when the sky is just dark, close the doors and Windows or screen doors and Windows, turn off the lights, focus on mosquito control for 2 to 3 hours, and people return to the room without stopping, until the next morning, for 1 to 2 weeks. In summer or during mosquito activities, it can be used every day to eliminate mosquitoes that leak into the room through loose doors and Windows. ③ After use for a period of time, see the base under the lamp accumulation of mosquito fly residues should be cleaned in time, clean must first cut off the power, hold the screwdriver insulated part, use the screwdriver metal rod to contact the two network cables between the power grid to break, discharge, and then press the external network with two thumbs, take out the rear network, take out the chassis for cleaning. ④ When cleaning the fly and mosquito lamp, be sure to cut off the power supply and discharge the high voltage grid with a screwdriver. When discharging, hold the insulated part of the screwdriver to prevent electric shock. When killing flies and mosquitoes, electrical sparks will be generated when working, so all dust, flammable and explosive possibilities of places and places are strictly prohibited to use, so as not to cause accidents.