We know that satellite TV is widely used in relatively remote places, so how to install and debug it? Here is to introduce to you.
Buy a cable, use the two ends of the cable to cut the cable neatly, and use a knife to peel out 1.5CM of copper wire.
Then insert the metal "F" head between the wire insulation and the insulation foam, connect the cable cable with the "F" head to the receiver and the high-frequency head respectively, and then connect the receiver to the TV with the three-end video cable.
After the above steps are completed, place the receiving pot in a relatively open open place, facing 25 degrees south by west.
Turn on the TV, turn on the AV of the TV, press the switch of the receiver, align the remote control with the receiver, press the menu key to select the system Settings, enter the password 0000, press the confirm key, and start to display the signal strength and signal quality.