The hook arm garbage truck adopts full hydraulic control operating system, and the garbage compartment can be completely separated from the chassis. It has the advantages of reasonable structure, simple operation, stability, high efficiency, good sealing performance, convenient dumping, etc., and can realize the joint operation of one car and multiple garbage compartment, circular transportation, and fully improve the transportation capacity of the vehicle. Can carry multiple boxes in one car, high efficiency, energy saving and cost saving.
Hook arm garbage truck
Hook arm garbage truck adopts high-tech design can be placed hook arm, a car can carry a number of large car, easy loading and unloading, to achieve the secondary lifting of the carriage and make the mechanism the most labor-saving, with simple structure, stable and convenient operation, efficient loading and unloading, saving manpower and other advantages. The hook-arm garbage truck can be equipped with a number of garbage transfer boxes at the user's request. The transfer box can be used as a simple, beautiful and environmentally friendly garbage transfer station, which maximizes the efficiency of vehicle use.
Step 1 After starting the car, hang up the force extractor, push the locking hook handle down to the recovery position, the locking cylinder is retracted, so that the locking frame is turned over, and the turning frame is unlocked and fixed with the garbage box and the attached frame, and release the handle to return to the middle position; ② Pull the operation handle of the pull arm to the stretching position, the pull arm cylinder is extended, the active pull arm rotates around the front hinge shaft of the turnover turnover frame, and the garbage box turns over and tilts down with the active pull arm; When the garbage box is placed, no one is allowed to stand at the end of the carriage. ③ After the draw-arm garbage truck is placed, adjust the position of the active draw-arm hook and the box bend hook to make it unhook, push the draw-arm operation handle down to the falling position, the draw-arm cylinder is recovered, the active draw-arm is rotated around the front hinge shaft of the flip flip frame, the active draw-arm is placed back on the attached frame, the release of the force extractor bin is placed, and the vehicle can be transported.
Step 1 Push the operation handle of the locking hook to the recovery position, lock the cylinder to recover the locking frame, and lock and fix the turning frame and attached frame; ② Pull the operation handle of the pull arm to the stretching position, the pull arm cylinder is extended, the active pull arm rotates around the front hinge shaft of the flip flip frame, the pull arm is in the hook box position, adjust the hook height of the pull arm and align with the box bend; ③ When the pull arm hook hooks into the box bend hook, continue to push the pull arm operation handle to the falling position, so that the garbage box continues to get on the car; ④ When the garbage truck box is placed on the attached frame, loosen the operation handle of the pulling arm to make it return to the middle position, and then pull the locking hook operation handle to the locking position, and the locking cylinder is extended to make the locking frame turn up and lock and fix the turning frame with the garbage box, and loosen the handle to make it return to the middle position; Complete the loading work of the garbage truck box, loosen the force extractor, and the whole vehicle can be transported.
It is necessary to strictly abide by the operating procedures. If the movement of the mechanism is abnormal during operation, it should stop working immediately, find out the cause in time, and continue working after troubleshooting.
Personnel should observe the site in detail and there should be any obstacles within the radius of the swing arm.