In the front, we have understood the production method of the push-pull wardrobe plan in cad software. Today, we will understand how to make the four-door push-pull wardrobe plan in cad.
AutoCAD 2013
Open AutoCAD 2013 software, click "Layer Manager", click "Layer", and name the layer "Four-door push-pull Wardrobe". Click the color block and set a layer color according to the icon to complete the setting of the four-door push-pull wardrobe layer (as shown in the picture);
Click [Rectangle Tool], enter: d in the command bar according to the icon and press the space bar, enter the length value: 2400 and press the space bar, continue to enter the width value: 2400 and press the space bar to complete the drawing of the rectangular pattern. Select the pattern, click the "decomposition tool" in the right toolbar, and blow up the pattern (as shown in the picture);
Click [Offset tool] in the right toolbar, enter the offset value: 80 in the command bar, and offset the bottom edge upward. Enter the offset value: 50 in the command bar, and then offset the top edge downward (as shown in the figure);
Continue to click [Offset tool] in the right toolbar, enter the offset value: 25 in the command bar, and then offset the two sides inward. After completion, click "Trim" to trim the illustrated line segment (as shown in the figure);
Click [Drawing] - [point] - [fixed number division], click the line segment, enter: 4 in the command bar and press the space bar to divide the selected line into four equal parts. Click the "Line Tool" to draw three straight line segments and three push-pull indicators at the position shown. In this way, our four-door push-pull wardrobe plan is complete.