skill

691Currently online
124Today's Reading
49Share Today
Multilingual display

cad How to make a four-door display cabinet plan

2018-04-05 11:12:53

We have already understood how to make five-door display cabinet plan in cad software, today we will understand how to make five-door display cabinet plan in cad.

Tools/Materials

AutoCAD 2013

Methods/Steps
1

Open AutoCAD 2013 software, click "Layer Manager", click "Layer", and name the layer as "Five-door display Cabinet". Click the color block and set a layer color according to the icon to complete the setting of the five-door display cabinet layer (as shown in the figure);

2

Click [Rectangle Tool], enter: d in the command bar according to the icon and press the space bar, enter the length value: 2000 and press the space bar, continue to enter the width value: 2000 and press the space bar to complete the drawing of the rectangular pattern. Select the pattern, click the "decomposition tool" in the right toolbar, and blow up the pattern (as shown in the picture);

3

Click [Offset] in the right toolbar, enter: 25 in the command bar, select the side edge and top edge of the pattern, and offset the side edge and top edge in turn. Enter: 80 in the command bar, select the bottom edge, and offset the bottom edge upward (as shown in the figure);

4

Click [offset] in the toolbar on the right, enter the value in the command bar according to the icon, and select the corresponding offset operation (as shown in the figure);

5

Click [Line Tool] to draw a line, click [Drawing] - [point] - [fixed number equal division], and enter the value: 4 in the command bar to generate line segment quarters. Click [Line tool] to finish drawing part of the pattern of the laminate according to the diagram;

6

Select the line segment shown in the diagram, click [drawing] - [point] - [fixed number equal division], and enter the value: 5 in the command bar to generate the line segment five equal division. When you are done, click the Line Tool to draw four straight lines in the illustration area. Import the prepared handle block to the file and adjust the handle position. After the completion of the details of the production, our five-door display cabinet plan will be completed.

Recommendation