Acid and alkali is often encountered in industry corrosion problems, acid and alkali corrosion is often an important problem in industrial production, so people should use acid and alkali resistant coating materials for pre-protection, this case is the use of KN17 polymer ceramic polymer to prevent acid and alkali corrosion.
Surface rough equipment, mixing equipment, trowel, pallet, scraper
Polymer ceramic polymer Kn17A, polymer ceramic polymer Kn17B
The surface of acid and alkali corrosion is cleaned and roughened to make the metal surface appear metal material.
Mixing KN17 polymer A and B, it is best to use special equipment when mixing, a small amount of manual mixing can be used.
The mixed material is applied to the surface of the metal that has been roughened, compacted vigorously, and can be applied in multiple layers when it is thicker.
After the curing is fully put into production, you can not rush, if the time is tight, you can use heating.
Rough surface is very important, be sure to remove rust and oil, keep the metal dry
Fully cured, can be heated curing